Electrical Appliance Installation in Burbank, CA
A new appliance is only as good as the power behind it. Ovens, ranges, dryers, and dishwashers each have their own electrical needs, and a mismatch between the appliance and the home's wiring can lead to tripped breakers, poor performance, or safety concerns. Getting the electrical side right from the start saves frustration later.
AJAX Home Services, operated by AJAX ELECTRIC INC, helps Burbank homeowners install appliances and prepare the outlets and circuits they need. This page covers each installation service, what to check before delivery day, and what to consider so your new appliance works the way it should. If you are planning a kitchen update or a laundry-room refresh, call us early so the electrical needs are known before the appliance arrives.
Our Appliance Installation Services
Electric Oven Installation
Signs: A new wall oven that has to replace an older unit, a remodel that moves the oven to a new spot, or an existing connection that looks worn or does not match the new model.
When to call: Before the oven is delivered, so you know the cabinet space and the power connection are ready.
What to consider: Check the oven's installation instructions for its electrical requirements. The circuit, wiring, and connection must suit the model you chose. Installation can involve utility or city requirements, so ask us.
Electric Range Installation
Signs: A freestanding or slide-in range replacing an older one, a different plug or connection type than the new model needs, or a kitchen that is being rearranged.
When to call: When you are shopping for the range or right after you buy it, before the old one is removed.
What to consider: Ranges are among the heaviest electrical loads in a home. The outlet, cord, and circuit must all be compatible, and the measurements of the space matter too.
Cooktop Installation
Signs: A new cooktop being set into a counter, a counter cutout that needs to match the unit, or a feed that was left from an older appliance.
When to call: During planning, since counter work and wiring are best coordinated together.
What to consider: A built-in cooktop often has a separate power feed from the oven. Confirm the cooktop's requirements and where the connection will sit beneath the counter.
Dishwasher & Electrical Hookup
Signs: A new dishwasher going in, a unit that has been unplugged and needs a safe connection, or an outlet or wiring under the sink that looks unsafe.
When to call: Before the dishwasher is moved into place, since access under the counter is limited afterward.
What to consider: We handle the electrical side of the hookup. Water supply and drain connections are separate considerations, so ask us what is included for your project.
Garbage Disposal Installation
Signs: A disposal that is being replaced, a sink that never had one, or a switch and outlet that are missing or in an inconvenient place.
When to call: When you are choosing a unit, so power and switch placement can be planned.
What to consider: Disposals need a dependable power source and a way to switch them on and off. Ask us what your sink setup will need before you buy.
Range Hood Installation
Signs: A new hood above the range, a replacement of an old or noisy hood, or a kitchen remodel that changes the cooking area.
When to call: Before cabinets and walls are finished, if possible, since power and mounting points are easier to arrange early.
What to consider: A range hood needs a power connection and a secure mount. Venting and ductwork can add other considerations, so tell us about your kitchen layout.
Microwave Installation
Signs: An over-the-range or built-in microwave that needs to be installed, or a microwave that is sharing an overloaded outlet.
When to call: When the new unit is purchased, so the outlet location is checked against its manual.
What to consider: Microwaves draw substantial power for their size. Check whether your model calls for its own circuit, and avoid powering it from a crowded outlet.
Washer & Dryer Electrical Hookup
Signs: A laundry space with no suitable outlet, a dryer whose plug does not match the wall receptacle, or a washer that trips a breaker.
When to call: Before the machines are delivered, or when you are converting a closet or garage into a laundry area.
What to consider: Dryers usually need more power than washers, and the receptacle must match the dryer's cord. Our work here is electrical. Ask us about anything beyond that.
Appliance Power Outlet Installation
Signs: An appliance that is being run through an extension cord, an outlet that is behind a heavy unit, or a new location that has no outlet at all.
When to call: When an appliance is moved, added, or when you notice that an outlet gets warm or loose.
What to consider: The outlet type has to match the appliance, and placement should keep the cord safe and accessible. Extension cords are not a safe long-term solution for major appliances.
Dedicated Appliance Circuit Installation
Signs: A breaker that trips when two appliances run together, lights that dim when a large appliance starts, or an appliance that the manufacturer says needs its own circuit.
When to call: When you add a high-power appliance, or when an existing circuit is clearly overloaded.
What to consider: A dedicated circuit serves just one appliance, which reduces overload. The panel's available capacity and the distance of the run both affect what is needed.
Appliance Installation Safety Tips
- Read the installation instructions before delivery day. They list the electrical requirements for the model.
- Never use an extension cord or a power strip for a large appliance such as a range, dryer, or microwave.
- Do not modify a plug or cut a cord to make it fit a receptacle. Have the outlet changed instead.
- Do not attempt high-power wiring yourself. Turn the breaker off and call if you are unsure.
- If an outlet or plug feels hot, smells like burning, or shows discoloration, stop using it and have it inspected.
Where We Install Appliances
We help homeowners with appliance installation across [Burbank], [Glendale], [North Hollywood], [Sun Valley], [Toluca Lake], [Studio City], [Sherman Oaks], and [Pasadena]. Some older homes in these neighborhoods were wired long before today's appliances existed, so it is worth confirming the electrical setup before you buy.
How to Request Installation
- Contact us. Call 747-340-7718 and tell us which appliance you are installing, along with its make and model if you have it.
- We review. We go over the appliance's needs and your home's setup, then explain what the installation involves.
- We complete the work. Once you approve the plan, we install the connection, outlet, or circuit and hook up the appliance.
Appliance Installation FAQs
Do I need a special outlet for an electric range or dryer?
Often, yes. These appliances typically need a specific receptacle and circuit. The installation manual for your model will say what it requires.
Can I plug a new appliance into the outlet the old one used?
Not always. The new model may need a different plug type or more power. Compare the manual with your existing outlet before delivery.
What is a dedicated circuit, and does my appliance need one?
It is a circuit that serves one appliance only. Many large appliances call for one. Check the manufacturer's instructions, or ask us.
Why does my breaker trip when I run the dishwasher and microwave together?
It may mean the circuit is overloaded or shared by too many devices. A dedicated circuit may help. Have it evaluated.
Can you hook up a dishwasher or a garbage disposal?
We handle the electrical side. Ask us what else is included in your specific job.
Should I have the electrical work done before the appliance arrives?
Yes, whenever possible. Having the outlet or circuit ready means the appliance can be set up right away.
Is an extension cord okay for a new appliance?
For large appliances, no. Extension cords are not meant to carry that load for long periods.
Will installing a new circuit require a permit?
It can involve utility or city requirements. Ask us about your home.
What details should I have ready when I call?
The appliance type, make and model, where it is going, and anything you know about the current outlet or breaker.
Related Services
Plan Your Appliance Installation With AJAX
Before the new appliance shows up, make sure your home is ready for it. Call AJAX Home Services at 747-340-7718 to talk through your installation.
Phone: 747-340-7718 | https://ajaxhomeservicesburbank.com